Send us an email
Please enter your name and contact info.
Please enter your name and contact info.
Call Us Today! (850) 748-1066
While an A/C only cools, and a regular furnace only heats, a heat pump is designed to both cool and heat your home or commercial space.
Check the thermostat, is it set low enough, did someone mess with the settings?
Check the breaker system. It could be that the indoor unit is running properly, but the outdoor unit has lost power.
Check the air filter, and see if it’s dirty or clogged.
Check the outdoor unit for ice or debris.
No need to get overheated while searching for the solution. Why not call Diamond Air Design to get your unit blowing cold again, safely and quickly?
According to Energy.gov, 68 degrees is a good room temperature while you’re awake and at home, but it can be set lower when no one is home or during sleep hours. You can reduce your annual cooling and heating costs by up to 10 percent by turning down your thermostat 7-10 degrees for eight hours a day.
As a general rule, you should do a visual inspection monthly and change the filter. If the filters appear to be getting dirty sooner, then change them more frequently. A filter that does not flow properly will cause your unit to work harder, therefore, increasing your energy cost. In addition, a clogged air filter makes your unit run hotter and put more strain on your system which shortens its life span. It is the best maintenance & most cost-effective thing you can do for comfort, energy saving, and system longevity.